Details - Graco ProMix PD2K Operation

Operation Using a Programmable Logic Controller (PLC)
Communication Gateway
Communication Communication
CGM Overview Overview
CGM CGM Overview
The CGM provides a control link between the PD2K
system and a selected fieldbus. This linkage provides
the means for remote monitoring and control by
external automation systems.
CGM Kits CGM CGM Kits Kits
The PD2K system does not come with a CGM; it
must be purchased separately. The available CGM
field bus protocols are listed in the tables.
NOTE: The CGM Installation kit is also required for NOTE: NOTE:
DeviceNet, EtherNet/IP, and Modbus TCP protocols.
PROFINET protocol calls for two CGM modules with
the PD2K Dual Panel application. The PROFINET kit
consolidates all installation hardware as well as the
two CGM modules into a single part number.
26
Gateway Module Module (CGM)
Gateway Module
(CGM) Details

Details

(CGM) Details
CGM
CGM CGM
Installation Installation Kit Installation
Part No.
Part Part
24W829
25D997
CGM CGM Part CGM
CGMDN0
CGMEP0
24W462
Kit Kit
No. Field Bus Bus
No. Field Field Bus
DeviceNet
EtherNet/IP
Modbus TCP
PROFINET
Fieldbus
Part No. Part No. No. Fieldbus Fieldbus
DeviceNet
EtherNet/IP
Modbus TCP
Manual
Manual Manual
334494
334494
312864
Manual
Manual Manual
312864
312864
334183
3A4486D