Graco ProMix PD2K Operation page 66

Run Mode Screens
Usage Screen Screen
Usage Usage Screen
The first Usage screen displays the current job
usage of component A, B, A+B, and solvent (S). The
second Usage screen displays grand total usage of
component A, B, A+B, and solvent (S). Edits may
be made only if Manual Override is enabled on
System Screen 1, page
displays the total volume pumped for all available
materials.
NOTE: NOTE: NOTE: In 1K Mode, the B and A+B components are
not shown.
1. Press the Edit softkey
for editing.
2. To enter or change the User ID ( ), select the
field to open the User ID Keyboard screen,
and enter the desired name (10 characters
maximum).
3. To log the current job for the appropriate Mix Unit,
press the corresponding Job Complete softkey,
or . This will clear the current usage
fields and increment to the next job number.
The Grand Totals cannot be cleared. See the
Jobs Screen, page
4. Press the Edit softkey
Figure 27 Usage Screen
Figure 28 Usage Screen, 1K Mode
66
68. The third Usage screen
to open the screen
67, to review past jobs.
to close the screen.
Figure 29 User ID Keyboard Screen
Figure 30 Usage Grand Total
Figure 31 Usage Log
3A4486D