Adm Display Details; Navigating The Screens - Graco Reactor 2 E-30 Operation

ADM Display Display Details Details
ADM ADM Display Details
Power Up Up Screen Screen
Power Power Up Screen
The following screen appears when the ADM is
powered up. It remains on while the ADM runs through
initialization and establishes communication with other
modules in the system.
Menu Bar Bar
Menu Menu Bar
The menu bar appears at the top of each screen. (The
following image is only an example.)
Date and and Time Time
Date Date and Time
The date and time are always displayed in one of the
following formats. The time is always displayed as a
24-hour clock.
• DD/MM/YY HH:MM
• YY/MM/DD HH:MM
• MM/DD/YY HH:MM
Arrows
Arrows Arrows
The left and right arrows indicate screen navigation.
Screen Screen Menu Screen Menu Menu
The screen menu indicates the currently active screen,
which is highlighted. It also indicates the associated
screens that are available by scrolling left and right.
System Mode Mode
System System Mode
The current system mode is displayed at the lower left
of the menu bar.
333023M
Advanced Display Module (ADM)
Alarm/Deviation
Alarm/Deviation Alarm/Deviation
The current system error is displayed in the middle of
the menu bar. There are four possibilities:
Icon Icon Icon Function Function Function
No Icon
No information or no error has occurred
Advisory
Deviation
Alarm
Status Status Status
The current system status is displayed at the lower right
of the menu bar.
Soft Keys Keys
Soft Soft Keys
Icons next to the soft keys indicate which mode or
action is associated with each soft key. Soft keys that
do not have an icon next to them are not active in the
current screen.
NOTICE NOTICE NOTICE
To prevent damage to the soft key buttons, do not
press buttons with sharp objects such as pens, plastic
cards, or fingernails.
Navigating Navigating the Navigating the Screens the Screens Screens
There are two sets of screens:
• The Run screens control spraying operations and
display system status and data.
• The Setup screens control system parameters and
advanced features.
Press on any Run screen to enter the Setup
screens. If the system has a password lock, the
Password screen displays. If the system is not locked
(password is set to 0000), System Screen 1 displays.
Press on any Setup screen to return to the
Home screen.
Press the Enter soft key
function on any screen.
Press the Exit soft key
Use the other softkeys to select the function adjacent
to them.
to activate the editing
to exit any screen.
21