Monitoring Real-Time Traffic, Security, Statistics, And Web Usage - NETGEAR STM150 Appliance Reference Manual

ProSecure Web/Email Security Threat Management (STM) Appliance Reference Manual
Table 6-4. Alerts Settings (continued)
Setting
Enable Malware
Alerts
Enable Malware
Outbreak Alerts
4. Click Apply to save your settings.
Monitoring Real-Time Traffic, Security, Statistics, and
Web Usage
You can monitor the real-time traffic, security events, and statistics from the Dashboard screen.
The Web Usage screen displays which hosts on your network are consuming the most resources.
6-10
Description (or Subfield and Description)
Select this checkbox to enable malware alerts, and configure the Subject and
Message fields.
Subject Enter the subject line for the e-mail alert. The default text is "[Malware
alert]".
Message Enter the content for the e-mail alert. The default text is
%VIRUSINFO%, which is the meta word that enables the STM to insert
the proper malware information
Note: In addition to the %VIRUSINFO% meta word, you can insert the
following meta words in your customized message:
%TIME%, %PROTOCOL%, %FROM%, %TO%, %SUBJECT%,
%FILENAME%, %ACTION%, %VIRUSNAME%.
Select this checkbox to enable malware outbreak alerts, and configure the
Outbreak Criteria, Protocol, and Subject fields.
Outbreak To define a malware outbreak, specify the following fields:
Criteria • malware found within. The number of malware incidents that will be
detected.
• minutes (maximum 90 minutes). The period in which the number of
malware incidents will be detected.
Note: When the specified number of detected malware incidents is
reached within the time threshold, the STM sends a malware outbreak
alert.
Protocol Select the checkbox or checkboxes to specify the protocols (SMTP,
POP3, IMAP, HTTP, FTP, and HTTPS) for which malware incidents will
be detected.
Subject Enter the subject line for the e-mail alert.
v1.0, September 2009
Monitoring System Access and Performance