Downloading Wireless Management System Logs - NETGEAR WMS5316 - ProSafe 16-AP Wireless Management System Reference Manual

ProSafe 16 AP Wireless Management System WMS5316 Reference Manual
3. Locate and select the previously saved backup file, then click Apply.
After restoring previous settings, the Wireless Management System will restart. This will take
about one minute.
Warning: Do not try to go online, turn off the Wireless Management System,

Downloading Wireless Management System Logs

Maintenance Logs allow backup of the logs collected on the Wireless Management System. In the
event of a problem or failure, these logs along with backed up configuration settings help
developers determine the cause.
Figure 7-15
To download logs:
1. On the Maintenance Tab, select Logs.
2. Click Backup to create a backup file of the current logs.
3. If you do not have your browser set up to save downloaded files automatically, then locate
where you want to save the file, rename it if you like.
If your browser is set up to save downloaded files automatically, the file will be saved to your
browser's download location on the hard disk
4. Click Backup.
Maintenance
shutdown the computer or do anything else until it finishes restarting!
When the Test light turns off, wait a few more seconds before doing
anything with the Wireless Management System.
v1.0, March 2010
7-13