Intra-Building Ports Warning; Installation Instructions Warning; Rack-Mounting Requirements And Warnings - Juniper MX104 Hardware Manual

Copyright © 2014, Juniper Networks, Inc.
Appendix A: Safety and Regulatory Compliance Information for the MX104 Router

Intra-Building Ports Warning

WARNING: The intra-building ports of the equipment or subassembly are
suitable for connection to intra-building or unexposed wiring or cabling only.
The intra-building ports of the equipment or subassembly MUST NOT be
metallically connected to interfaces that connect to the OSP or its wiring.
These interfaces are designed for use as intra-building interfaces only (Type
2 or Type 4 ports as described in GR-1089) and require isolation from the
exposed OSP cabling. The addition of Primary Protectors is not sufficient
protection in order to connect these interfaces metallically to OSP wiring.

Installation Instructions Warning

WARNING: Read the installation instructions before you connect the hardware
equipment to a power source.
Waarschuwing Raadpleeg de installatie-aanwijzingen voordat u het systeem
met de voeding verbindt.
Varoitus Lue asennusohjeet ennen järjestelmän yhdistämistä virtalähteeseen.
Attention Avant de brancher le système sur la source d'alimentation, consulter
les directives d'installation.
Warnung Lesen Sie die Installationsanweisungen, bevor Sie das System an
die Stromquelle anschließen.
Avvertenza Consultare le istruzioni di installazione prima di collegare il sistema
all'alimentatore.
Advarsel Les installasjonsinstruksjonene før systemet kobles til strømkilden.
Aviso Leia as instruções de instalação antes de ligar o sistema à sua fonte
de energia.
¡Atención! Ver las instrucciones de instalación antes de conectar el sistema
a la red de alimentación.
Varning! Läs installationsanvisningarna innan du kopplar systemet till dess
strömförsörjningsenhet.

Rack-Mounting Requirements and Warnings

Ensure that the equipment rack into which the chassis is installed is evenly and securely
supported, to avoid the hazardous condition that could result from uneven mechanical
loading.
123