Juniper MX104 Hardware Manual page 47

Copyright © 2014, Juniper Networks, Inc.
Table 13: Protocols and Applications Supported by MX104
Routers (continued)
Protocol or Application
Building-integrated timing supply (BITS)
Clock synchronization
Redundant clock (multiple 1588 masters)
OAM, Troubleshooting, Manageability, Lawful Intercept
BFD
Network Time Protocol (NTP)
IEEE 802.3ag OAM Connectivity Fault Management
IEEE 802.3ah OAM Link-Fault Management
Ethernet Frame Delay Measurements (ITU-TY.1731)
IEE802.1ag Port Status TLV and Interface Status TLV interface-status
type, length, and value (TLV) support
Distinguish each 802.1ag connection by VLAN-ID
Ethernet Frame Loss Measurement(ITU-TY.1731)
MPLS OAM
Traffic Sampling, Forwarding, and Monitoring
Domain Name System (DNS)
Trivial File Transfer Protocol (TFTP)
Port-Mirroring (local)
Interface loopback
Interface byte and packet stats
Interface queue stats
Drop packet stats
Interface passive-monitor-mode
Multipacket mirror
Security
TACACS+ Authentication
Chapter 3: Protocols and Applications Supported by the Router
MX104
13.2R2
13.2R2
–
13.2R2
13.2R2
13.2R2
13.2R2
13.2R2
13.2R2
13.2R2
13.2R2
13.2R2
13.2R2
13.2R2
13.2R2
13.2R2
13.2R2
13.2R2
–
13.2R2
31