Connecting An Mx104 Fiber-Optic Cable - Juniper MX104 Hardware Manual

MX104 3D Universal Edge Router Hardware Guide
88
Before you begin disconnecting a fiber-optic cable from an optical transceiver installed
in an MX104 router, ensure that you have taken the necessary precautions for safe handling
of lasers (see "Laser Safety Warnings for Juniper Networks Devices" on page
Ensure that you have the following parts and tools available:
A rubber safety cap to cover the transceiver
A rubber safety cap to cover the fiber-optic cable connector
To disconnect a fiber-optic cable from an optical transceiver installed in the router:
Disable the port in which the transceiver is installed by issuing the following command:
1.
[edit interfaces]
user@router# set interface-name disable
WARNING: Do not look directly into a fiber-optic transceiver or into the
ends of fiber-optic cables. Fiber-optic transceivers and fiber-optic cables
connected to transceivers emit laser light that can damage your eyes.
Carefully unplug the fiber-optic cable connector from the transceiver.
2.
Cover the transceiver with a rubber safety cap.
3.
WARNING: Do not leave a fiber-optic transceiver uncovered except when
inserting or removing a cable. The rubber safety cap keeps the port clean
and prevents accidental exposure to laser light.
Cover the fiber-optic cable connector with the rubber safety cap.
4.

Connecting an MX104 Fiber-Optic Cable

MX104 routers have field-replaceable unit (FRU) optical transceivers to which you can
connect fiber-optic cables.
Before you begin connecting a fiber-optic cable to an optical transceiver installed in a
router, ensure that you have taken the necessary precautions for safe handling of lasers
(see "General Laser Safety Guidelines for Juniper Networks Devices" on page
To connect a fiber-optic cable to an optical transceiver installed in a router:
WARNING: Do not look directly into a fiber-optic transceiver or into the ends
of fiber-optic cables. Fiber-optic transceivers and fiber-optic cables connected
to transceivers emit laser light that can damage your eyes.
If the fiber-optic cable connector is covered by a rubber safety cap, remove the cap.
1.
Save the cap.
Remove the rubber safety cap from the optical transceiver. Save the cap.
2.
128).
128).
Copyright © 2014, Juniper Networks, Inc.