MX104 3D Universal Edge Router Hardware Guide
Related
Documentation
MX104 1-PPS and 10-MHz GPS Port Specifications
MX104 Time of Day Port Specifications
Cable Specifications
176
Table 36: BITS Port Pinouts (continued)
Pin
5
6
7
8
Connecting the MX104 Router to External Clocking and Timing Devices on page 61
The router contains four ports that support 1-pulse-per-second (PPS) and 10-MHz GPS
signals. These signals are internally isolated and have surge protection.
Table 37 on page 176
lists the specifications for the cables that connect to the
10MHZ
input and output ports.
Table 37: 1-PPS and 10-MHz GPS Port Specifications
Specification
Cable specification
Router receptacle
Connector specification
Signal support
A time-of-day (ToD) port on the front panel of the router allows you to connect external
timing signal sources. The external timing input port is labeled
Cable Specifications on page 176
Port Pinouts on page 177
Table 38 on page 177
lists the specifications for the cable that connects to the
NOTE:
The output signals are not supported
Description
EXT_CLKA_TTIP_LINE
Reserved
Reserved
Reserved
Value
Coaxial
Four SMB input and output connectors
Molex 50-ohm SMB (or equivalent)
10-MHz GPS and 1-pulse-per-second (PPS)
Copyright © 2014, Juniper Networks, Inc.
Direction
Output
–
–
–
and
1PPS
.
TOD
port.
TOD