Mx104 Routing Engine Usb Port Specifications - Juniper MX104 Hardware Manual

MX104 3D Universal Edge Router Hardware Guide
Related
Documentation

MX104 Routing Engine USB Port Specifications

Related
Documentation
180
Table 43: Console Port Pinouts (continued)
Pin Signal
7 DSR/DCD
8 CTS
MX104 Routing Engine Overview on page 20
Maintaining the MX104 Routing Engines on page 76
The following Juniper Networks USB Flash drives have been tested and are officially
supported for the USB port on all MX Series routers:
RE-USB-1G-S
RE-USB-2G-S
RE-USB-4G-S
CAUTION: Any USB memory product not listed as supported for MX Series
routers has not been tested by Juniper Networks. The use of any unsupported
USB memory product could expose your MX Series router to unpredictable
behavior. Juniper Networks Technical Assistance Center (JTAC) can provide
only limited support for issues related to unsupported hardware. We strongly
recommend that you use only supported USB Flash drives.
All USB Flash drives used on MX Series routers must have the following features:
USB 2.0 or later.
Formatted with a FAT or MS-DOS file system.
MX104 Routing Engine Overview on page 20
Initially Configuring the MX104 Router on page 65
Description
Data Set Ready
Clear to Send
Copyright © 2014, Juniper Networks, Inc.