Grounding Cable Lug Specifications; Figure 48: Grounding Points On The Mx104 Routers - Juniper MX104 Hardware Manual

MX104 3D Universal Edge Router Hardware Guide

Grounding Cable Lug Specifications

158

Figure 48: Grounding Points on the MX104 Routers

NOTE: All bare grounding connection points to the router must be cleaned
and coated with an antioxidant solution before grounding the router.
NOTE: All surfaces on the router that are unplated must be brought to a
bright finish and treated with an antioxidant solution before connecting the
router.
NOTE: All nonconductive surfaces on the router must be removed from all
threads and connection points to ensure electrical continuity.
The grounding cable lug is used to secure the grounding cable to the grounding points
on the chassis. The grounding cable lug attaches to the grounding cable (see
Figure 49 on page 159) and is secured to the router by two SAE 10-32 screws. We
recommend using washers between the grounding lug and the screws. The grounding
cable lug, screws, and washers are supplied with the router.
Copyright © 2014, Juniper Networks, Inc.