24-Port Gigabit Ethernet Xpim Leds - Juniper SRX Series Manual

RELATED DOCUMENTATION
24-Port Gigabit Ethernet XPIM Overview | 111
24-Port Gigabit Ethernet XPIM Key Features | 115

24-Port Gigabit Ethernet XPIM LEDs | 117

24-Port Gigabit Ethernet XPIM Components | 112
24-Port Gigabit Ethernet XPIM Basic Configuration | 229
24-Port Gigabit Ethernet XPIM LEDs
The 24-Port Gigabit Ethernet XPIM has the LEDs listed in
Table 61: 24-Port Gigabit Ethernet XPIM LED States
LED
STATUS
LINK/ACT
N/A
NOTE: This LED is not
applicable on the non-PoE
24-Port XPIM. See
Figure 29 on page 118.
PoE
NOTE: Applicable on the
PoE XPIM only. See
Figure 30 on page 118.
Color State
Green On
Amber On
Red On
Green On
Off
Blinking
N/A N/A
Green On
Off
Blinking
Table 61 on page 117.
Description
XPIM is online and functioning normally.
XPIM is starting up, running diagnostics, or
shutting down.
XPIM has failed.
Port is online.
Port is offline.
Port is receiving or sending data.
Not used on the non-PoE XPIM.
Port is PoE enabled and online.
Port is offline.
Port is PoE enabled and receiving or sending
data.
117