16-Port Gigabit Ethernet XPIM (PoE) LEDs
Related
Documentation
SRX550 High Memory Services Gateway Mini-Physical Interface Modules Overview
Copyright © 2016, Juniper Networks, Inc.
Table 16 on page 31
lists the LEDs on the 16-Port Gigabit Ethernet XPIM.
Table 16: 16-Port Gigabit Ethernet XPIM LED States
LED
Color
STATUS
Green
Yellow
Red
LINK/ACT
Green
N/A
N/A
PoE
Green
SRX550 High Memory Services Gateway Gigabit-Backplane Physical Interface Modules
Overview on page 23
8-Port Gigabit Ethernet SFP XPIM on page 25
SRX550 High Memory Services Gateway Mini-Physical Interface Modules Overview
on page 31
1-Port Serial Mini-Physical (SRX-MP-1SERIAL-R) Interface Module on page 32
1-Port T1/E1 Mini-Physical (SRX-MP-1T1E1-R) Interface Module on page 34
The SRX550 High Memory Services Gateway has two slots (slots 1 and 2) for installing
Mini-Physical Interface Modules (Mini-PIMs).
A Mini-PIM is a network interface card that is installed in the services gateway to provide
physical connections to a LAN or WAN. The Mini-PIMs supported on the services gateway
are field-replaceable units (FRUs), which you can remove or replace at your site. You
Chapter 3: Interface Module Description
State
Description
On
XPIM is online and functioning
normally.
On
XPIM is starting up, running
diagnostics, or shutting down.
On
XPIM has failed.
On
Port is online.
Off
Port is offline.
Blinking
Port is receiving or sending data.
N/A
Not used on the non-PoE XPIM.
On
Port is PoE enabled and online.
Off
Port is offline.
Blinking
Port is PoE enabled and receiving or
sending data.
31