Serial Gigabit-Backplane Physical Interface Module Cable Specifications; 8-Port Serial Gpim Interface Cables - Juniper SRX Series Manual

Services gateways for the branch physical interface modules
Hide thumbs Also See for SRX Series:
Table of Contents

Advertisement

CHAPTER 24
Serial Gigabit-Backplane Physical Interface Module
Cable Specifications
IN THIS CHAPTER

8-Port Serial GPIM Interface Cables | 157

EIA-449 DCE Cable Pinouts for 8-Port Serial Gigabit-Backplane Physical Interface Module | 159
EIA-449 DTE Cable Pinouts for 8-Port Serial Gigabit-Backplane Physical Interface Module | 163
EIA-530 DCE Cable Pinouts for the 8-Port Serial Gigabit-Backplane Physical Interface Module | 167
EIA-530 DTE Cable Pinouts for the 8-Port Serial Gigabit-Backplane Physical Interface Module | 170
EIA-530A DCE Cable Pinouts for 8-Port Serial Gigabit-Backplane Physical Interface Module | 174
EIA-530A DTE Cable Pinouts for the 8-Port Serial Gigabit-Backplane Physical Interface Module | 177
RS-232 DCE Cable Pinouts for the 8-Port Serial Gigabit-Backplane Physical Interface Module | 180
RS-232 DTE Cable Pinouts for the 8-Port Serial Gigabit-Backplane Physical Interface Module | 182
V.35 DCE Cable Pinouts for the 8-Port Serial Gigabit-Backplane Physical Interface Module | 184
V.35 DTE Cable Pinouts for the 8-Port Serial Gigabit-Backplane Physical Interface Module | 188
X.21 DCE Cable Pinouts for the 8-Port Serial Gigabit-Backplane Physical Interface Module | 191
X.21 DTE Cable Pinouts for the 8-Port Serial Gigabit-Backplane Physical Interface Module | 193
8-Port Serial GPIM Interface Cables
All the ports of the 8-Port Serial Gigabit-Backplane Physical Interface Module (GPIM) are connected to
two dual stacked 136-pin VHDCI connectors. Custom cables are used to connect from the VHDCI
connectors to the data terminal equipment (DTE) or the data circuit-terminating equipment (DCE). Different
cables are required to support different protocol and the protocols are identified using the cable ID. The
cables are labeled with a letter (refers to the cable type) and 4 digits (unique serial numbers for the cables).
Table 89 on page 158
lists the cables supported by 8-Port Serial GPIMs. You can order the cables from
Juniper Networks to connect to a port on the synchronous 8-Port Serial GPIM. The device to which you
are connecting and the serial interface types determine which type of cable you need.
157

Advertisement

Table of Contents
loading

This manual is also suitable for:

Srx550Srx650Srx220Srx240Srx 210

Table of Contents