1-Port Clear Channel Ds3/E3 Gpim; 1-Port Clear Channel Ds3/E3 Gpim Overview - Juniper SRX Series Manual

CHAPTER 11

1-Port Clear Channel DS3/E3 GPIM

IN THIS CHAPTER

1-Port Clear Channel DS3/E3 GPIM Overview | 77

1-Port Clear Channel DS3/E3 GPIM Components | 78
1-Port Clear Channel DS3/E3 GPIM Key Features | 79
1-Port Clear Channel DS3/E3 GPIM Hardware Specifications | 79
1-Port Clear Channel DS3/E3 GPIM LEDs | 80
1-Port Clear Channel DS3/E3 GPIM Supported Standards | 81
1-Port Clear Channel DS3/E3 GPIM Supported Loopback Diagnostics | 81
1-Port Clear Channel DS3/E3 GPIM Overview
The 1-Port Clear Channel DS3/E3 GPIM functions as a clear channel interface that can support DS3 (T3)
or E3 line rates of 44.796 or 34.368 Mbps, respectively. The device does not support channelization, but
it supports a subrate DS3/E3 configuration. The DS3/E3 interface is a popular high-bandwidth WAN
interface for large enterprise branch locations that enables high-quality voice, video, and data applications
with reduced latency. The clear channel implementation provides such features as subrate and scrambling
options used by major DSU vendors. The interface also supports loopback, bit error rate test (BERT), and
far-end alarm and control (FEAC) diagnostic capabilities. It supports Frame Relay, Point-to-Point Protocol
(PPP), and High-Speed Data Link Control (HDLC) serial encapsulation protocols.
The 1-Port Clear Channel DS3/E3 GPIM is suitable for:
Branch office and regional sites for medium-sized to large enterprises.
Corporate headquarters for medium-sized enterprises.
The 1-Port Clear Channel DS3/E3 GPIM supports IP configurations. Using the command-line interface
(CLI), you can configure the 1-Port Clear Channel DS3/E3 GPIM to operate in either DS3 or E3 mode.
The 1-Port Clear Channel DS3/E3 GPIM can be plugged into any GPIM slot on the services gateway.
Figure 16 on page 78 shows the front panel of the 1-Port Clear Channel DS3/E3 GPIM..
77