Table of Contents
Advertisement
CHAPTER 17
Dual CT1/E1 GPIM
IN THIS CHAPTER
Dual CT1/E1 GPIM Overview | 119
Dual CT1/E1 GPIM Components | 120
Dual CT1/E1 GPIM Key Features | 121
Dual CT1/E1 GPIM Hardware Specifications | 121
Dual CT1/E1 GPIM LEDs | 122
Dual CT1/E1 GPIM Overview
A Gigabit-Backplane Physical Interface Module (GPIM) is a network interface card (NIC) that installs in the
front slots of the SRX550 or SRX650 Services Gateway to provide physical connections to a LAN or a
WAN. The GPIM receives incoming packets from a network and transmits outgoing packets to a network.
NOTE:
The Dual CT1/E1 GPIM does not yet support channelization.
The Dual CT1/E1 GPIM provides the physical connection to T1 or E1 network media types and performs
T1 or E1 framing and line-speed signaling.
NOTE:
Only the SRX650 Services Gateway supports hot-swappable functionality for GPIMs.
The SRX550 Services Gateway does not support hot-swappable functionality for GPIMs.
The Dual CT1/E1 GPIM can be plugged into any GPIM slot on the services gateway.
shows the Dual CT1/E1 GPIM.
Figure 31 on page 120
119
Advertisement
Table of Contents
