1-Port Docsis Mini-Physical Interface Module Supported Standards - Juniper SRX Series Manual

Table 30: 1-Port DOCSIS Mini-PIM LED States (continued)
LED Color
UT Green
(Upstream)
LINK (to CMTS) Green
ONLINE Green
RELATED DOCUMENTATION
1-Port DOCSIS Mini-Physical Interface Module Overview | 51
1-Port DOCSIS Mini-Physical Interface Module Key Features | 52

1-Port DOCSIS Mini-Physical Interface Module Supported Standards | 55

1-Port DOCSIS Mini-Physical Interface Module Hardware Specifications | 53
1-Port DOCSIS Mini-Physical Interface Module Network Interface Specifications | 22
1-Port DOCSIS Mini-Physical Interface Module Basic Configuration | 204
1-Port DOCSIS Mini-Physical Interface Module Supported Standards
The Data over Cable System Interface Specifications Mini-Physical Interface Module (1-Port DOCSIS
Mini-PIM) supports DOCSIS 3.0 standards.
State Description
Blinking The 1-Port DOCSIS Mini-PIM scans for a valid
upstream DOCSIS channel to lock onto an upstream
channel.
On The 1-Port DOCSIS Mini-PIM has locked onto the
DOCSIS upstream channel.
Blinking The 1-Port DOCSIS Mini-PIM has an active link with
the CPE device, but data communication is not taking
place.
On The 1-Port DOCSIS Mini-PIM has an active link with
the CPE device, and data communication is taking place.
NOTE:
that originates or terminates at the cable modem.
Blinking The 1-Port DOCSIS Mini-PIM is establishing a
connection to the SRX Series device.
On The 1-Port DOCSIS Mini-PIM is synchronized with the
SRX Series device.
The Link LED does not blink for data traffic
55