8-Port Gigabit Ethernet Sfp Xpim Leds - Juniper SRX Series Manual

8-Port Gigabit Ethernet SFP XPIM LEDs

The 8-Port Gigabit Ethernet small form-factor pluggable XPIM (SFP XPIM) has two LEDs for each port —
LINK and ACT.Each XPIM has a STATUS LED, which indicates the status of the XPIM.The LEDs are listed
in Table 49 on page 96 . See
Table 49: 8-Port Gigabit Ethernet SFP XPIM LED States
LED Color
LINK Green
ACT Green
STATUS Green
Yellow
Red
RELATED DOCUMENTATION
8-Port Gigabit Ethernet SFP XPIM Overview | 92
8-Port Gigabit Ethernet SFP XPIM Hardware Specifications | 95
8-Port Gigabit Ethernet SFP XPIM Network Interface Specifications | 26
8-Port Gigabit Ethernet SFP XPIM Supported Modules | 97
8-Port Gigabit Ethernet SFP XPIM Key Features | 94
8-Port Gigabit Ethernet SFP XPIM Components | 93
8-Port Gigabit Ethernet SFP XPIM Basic Configuration | 221
"8-Port Gigabit Ethernet SFP XPIM Overview" on page 92
State
On
Off
Blinking
Off
On
Off
Description
Port is online.
Port is offline.
Port is receiving or sending data.
Port might be online but, is not receiving or sending
data.
The GPIM is functioning normally.
The GPIM is starting up, running diagnostics, or going
offline.
The GPIM has failed.
The GPIM is not powered on, is offline, or is not
configured.
for more information.
96