1-Port Sfp Mini-Physical Interface Module Hardware Specifications - Juniper SRX Series Manual

CAUTION:
third-party optic or cable, the Juniper Networks Technical Assistance Center (JTAC)
can help you diagnose the source of the problem. Your JTAC engineer might recommend
that you check the third-party optic or cable and potentially replace it with an equivalent
Juniper Networks optic or cable that is qualified for the device.
RELATED DOCUMENTATION
1-Port SFP Mini-Physical Interface Module Overview | 39

1-Port SFP Mini-Physical Interface Module Hardware Specifications | 41

1-Port SFP Mini-Physical Interface Module Network Interface Specifications | 20
1-Port SFP Mini-Physical Interface Module LEDs | 42
1-Port SFP Mini-Physical Interface Module Basic Configuration | 199
1-Port SFP Mini-Physical Interface Module Hardware Specifications
Table 24 on page 41 gives the physical specifications of the 1-Port Small Form-Factor Pluggable
Mini-Physical Interface Module (SFP Mini-PIM).
Table 24: 1-Port SFP Mini-PIM Physical Specifications
Description
Dimensions (H x W x L)
Weight
Connector type
Form factor
RELATED DOCUMENTATION
1-Port SFP Mini-Physical Interface Module Network Interface Specifications | 20
If you face a problem running a Juniper Networks device that uses a
Value
0.80 in. x 3.75 in. x 5.9 in.
(2.0 cm x 9.5 cm x 14.5 cm )
3.36 oz (95 g)
SFP
Mini-PIM
41