Connector To Db-15 Connector (Straight) Pinouts For The 1-Port T1/E1 Mini-Physical Interface Module - Juniper SRX Series Manual

Table 69: RJ-48 Connector to RJ-48 Connector (Crossover) Pinouts (continued)
RJ-48 Pin (on T1/E1
Mini-PIM)
4
5
3
6
7
8
RELATED DOCUMENTATION
RJ-48 Connector to RJ-48 Connector (Straight) Pinouts for the 1-Port T1/E1 Mini-Physical Interface
Module | 128
RJ-48 Connector to DB-15 Connector (Straight) Pinouts for the 1-Port T1/E1 Mini-Physical Interface
Module | 130
RJ-48 Connector to DB-15 Connector (Crossover) Pinouts for the 1-Port T1/E1 Mini-Physical Interface
Module | 132
1-Port T1/E1 Mini-Physical Interface Module Overview | 66
RJ-48 Connector to DB-15 Connector (Straight) Pinouts for the 1-Port
T1/E1 Mini-Physical Interface Module
Table 70 on page 130 gives RJ-48 connector to DB-15 connector (straight) pinouts.
Table 70: RJ-48 Connector to DB-15 Connector (Straight) Pinouts
RJ-48 Pin (on T1/E1 Mini-PIM)
1
2
RJ-48 Pin (Data Numbering
Form)
1
2
3
6
No connect
No connect
DB-15 Pin (Data Numbering
Form)
11
3
Signal
TX/Ring/– <––>RX/Ring/–
TX/Tip/+ <––>RX/Tip/+
Shield/Return/Ground
Shield/Return/Ground
No connect
No connect
Signal
RX/Ring/– <––>RX/Ring/–
RX/Tip/+ <––>RX/Tip/+
130