Power Over Ethernet Support On Srx Series Services Gateway Interfaces - Juniper SRX Series Manual

atm-vcmux
atm-nlpid
atm-cisco-nlpid
ether-over-atm-llc
atm-ppp-llc
atm-ppp-vcmux
atm-mlppp-llc
ppp-over-ether-over-atm-llc
RELATED DOCUMENTATION
SRX Series Services Gateway Mini-Physical Interface Modules Overview | 6
Supported SRX Series Services Gateway Interfaces | 5
SRX Series Services Gateway Interface Modules and Compatibility | 10

Power over Ethernet Support on SRX Series Services Gateway Interfaces

Power over Ethernet (PoE) supports the implementation of the IEEE 802.3 af and IEEE 802.3 at standards,
which allow both data and electric power to pass over a copper Ethernet LAN cable.
The SRX550 and SRX650 Services Gateways provide PoE ports, which supply electric power over the
same ports that are used for connecting network devices. PoE ports allow you to plug in devices that
require both network connectivity and electric power, such as voice over IP (VoIP) and IP phones and
wireless access points.
The PoE ports for the SRX550 and SRX650 Services Gateway reside on the individual XPIMs. The services
gateway supports the following XPIMs with PoE:
16-Port Gigabit Ethernet XPIM
24-Port Gigabit Ethernet XPIM
4482
4482
4482
4482
4482
4482
4482
4482
4470
4470
4470
1500
4476
4480
1500
1492
4482
4482
4482
4482
4482
4482
4482
4482
15