1-Port Gigabit Ethernet Sfp Mini-Physical Interface Module Key Features - Juniper SRX Series Manual

1-Port Gigabit Ethernet SFP Mini-Physical Interface Module Hardware Specifications | 35

1-Port Gigabit Ethernet SFP Mini-Physical Interface Module Key Features | 34

1-Port Gigabit Ethernet SFP Mini-Physical Interface Module Network Interface Specifications | 19
1-Port Gigabit Ethernet SFP Mini-Physical Interface Module Supported Modules | 36
1-Port Gigabit Ethernet SFP Mini-Physical Interface Module LEDs | 35
1-Port Gigabit Ethernet SFP Mini-Physical Interface Module Basic Configuration | 196
1-Port Gigabit Ethernet SFP Mini-Physical Interface Module Key Features
The 1-Port Gigabit Ethernet small form-factor pluggable Mini-Physical Interface Module (SFP Mini-PIM)
has the following key features:
Supports hot-swappable transceivers
Real-time visual status of connectivity and traffic flows
Provides Link Up/Down alarm
Half-duplex/full-duplex support
Autonegotiation
CAUTION:
third-party optic or cable, the Juniper Networks Technical Assistance Center (JTAC)
can help you diagnose the source of the problem. Your JTAC engineer might recommend
that you check the third-party optic or cable and potentially replace it with an equivalent
Juniper Networks optic or cable that is qualified for the device.
RELATED DOCUMENTATION
1-Port Gigabit Ethernet SFP Mini-Physical Interface Module Overview | 33
1-Port Gigabit Ethernet SFP Mini-Physical Interface Module Hardware Specifications | 35
1-Port Gigabit Ethernet SFP Mini-Physical Interface Module Network Interface Specifications | 19
1-Port Gigabit Ethernet SFP Mini-Physical Interface Module Supported Modules | 36
1-Port Gigabit Ethernet SFP Mini-Physical Interface Module LEDs | 35
1-Port Gigabit Ethernet SFP Mini-Physical Interface Module Basic Configuration | 196
If you face a problem running a Juniper Networks device that uses a
34