G.shdsl Mini-Physical Interface Module Cable Specifications; 1-Port G.shdsl 8-Wire Mini-Physical Interface Module Cable Specifications - Juniper SRX Series Manual

CHAPTER 21
G.SHDSL Mini-Physical Interface Module Cable
Specifications
IN THIS CHAPTER

1-Port G.SHDSL 8-Wire Mini-Physical Interface Module Cable Specifications | 135

1-Port G.SHDSL 8-Wire Mini-Physical Interface Module Cable Specifications
The 1-Port G.SHDSL Mini-Physical Interface Module (Mini-PIM) requires different combination of RJ-45
cables depending upon the connection available on the patch panel.
Table 73 on page 135 lists the cables that you can order from Juniper Networks to connect the G.SHDSL
Mini-PIM.
Table 73: 1-Port G.SHDSL Mini-PIM Cable Part Numbers
Connections
1X8–wire
2X4–wire
4X2–wire
The following topology diagrams show different G.SHDSL Mini-PIM connections:
Figure 33 on page 136 shows the topology for 1-Port G.SHDSL Mini-PIM operating in 4 X 2-wire mode.
Details
Standard RJ-45 connector
RJ-45 connector that connects to two RJ-11 connectors
(RJ-45 to 2 X RJ-11)
RJ-45 connector that connects to four RJ-11 connectors.
(RJ-45 to 4 X RJ-11)
135