Table of Contents
Advertisement
Figure 18: SRX650 Services Gateway Slot Numbers
650
The 2-Port 10-Gigabit Ethernet XPIM contains two 10-Gigabit Ethernet interfaces with both copper and
small form-factor pluggable plus transceiver (SFP+) terminations, to support redundancy and enable the
services gateway to be used as a pure security service device. The 2-Port 10-Gigabit Ethernet XPIM also
provides effective MPLS/GRE termination of customer traffic with reasonable performance.
NOTE:
Only the SRX650 Services Gateway supports hot-swappable functionality for GPIMs.
The SRX550 Services Gateway does not support hot-swappable functionality for GPIMs.
Figure 19 on page 84
shows the 2-Port 10-Gigabit Ethernet XPIM.
Figure 19: 2-Port 10-Gigabit Ethernet XPIM
RELATED DOCUMENTATION
2-Port 10-Gigabit Ethernet XPIM Key Features | 87
2-Port 10 Gigabit Ethernet XPIM Hardware Specifications | 88
2-Port 10 Gigabit Ethernet XPIM LEDs | 90
2-Port 10-Gigabit Ethernet XPIM Components | 84
2-Port 10-Gigabit Ethernet XPIM Basic Configuration | 217
Installing a Gigabit-Backplane Physical Interface Module on the SRX Series Services Gateway | 253
2-Port 10-Gigabit Ethernet XPIM Components
The 2-Port 10 Gigabit Ethernet XPIM contains the components listed in
7
5
3
1
8
6
4
2
Table 43 on page
84
85.
Advertisement
Table of Contents
