CHAPTER 5
1-Port ADSL2+ Mini-Physical Interface Module
IN THIS CHAPTER
1-Port ADSL2+ Mini-Physical Interface Module Overview | 45
1-Port ADSL2+ Mini-Physical Interface Module Key Features | 46
1-Port ADSL2+ Mini-Physical Interface Module Hardware Specifications | 47
1-Port ADSL2+ Mini-Physical Interface Module LEDs | 48
1-Port ADSL2+ Mini-Physical Interface Module Supported Standards | 48
1-Port ADSL2+ Mini-Physical Interface Module Supported Loopback Diagnostics | 49
1-Port ADSL2+ Mini-Physical Interface Module Overview
The 1-Port ADSL2+ Mini-Physical Interface Module (Mini-PIM) provides a single physical interface to
asymmetric digital subscriber line (ADSL) network media types.
The following 1-Port ADSL2+ Mini-PIM cards are available:
Annex A
Annex B
NOTE:
The ADSL2+ Annex A card also operates in Annex M mode.
Figure 8 on page 45
shows the front panel of ADSL2+ Annex A Mini-PIM.
Figure 8: ADSL2+ Annex A Mini-PIM Front Panel
Figure 9 on page 46
shows the front panel of ADSL2+ Annex B Mini-PIM.
45