1-Port Docsis Mini-Physical Interface Module Key Features - Juniper SRX Series Manual

NOTE: (För Sverige och Norge endast) Att ansluta en enhet via en jordad kontakt och/eller via
annan utrustning samtidigt som den är kopplad till ett kabel-tv system innebär en brandrisk. För
att förebygga detta måste du placera en galvanisk isolator mellan enheten och kabel-tv systemet.
The note translates as follows:
(For Sweden and Norway only) Connecting a device through a grounded outlet and/or through
other equipment while it is also connected to a cable TV system creates a fire risk. To prevent
this, you need to place a galvanic isolator between the device and the cable TV system.
RELATED DOCUMENTATION

1-Port DOCSIS Mini-Physical Interface Module Key Features | 52

1-Port DOCSIS Mini-Physical Interface Module Supported Standards | 55
1-Port DOCSIS Mini-Physical Interface Module Hardware Specifications | 53
1-Port DOCSIS Mini-Physical Interface Module Network Interface Specifications | 22
1-Port DOCSIS Mini-Physical Interface Module LEDs | 54
1-Port DOCSIS Mini-Physical Interface Module Basic Configuration | 204
1-Port DOCSIS Mini-Physical Interface Module Key Features
The Data over Cable System Interface Specifications Mini-Physical Interface Module (1-Port DOCSIS
Mini-PIM) has the following key features:
Provides high data transfer rates of over 150 Mbps downstream
Supports four downstream and four upstream channel bonding
Supports quality of service (QoS)
Provides interoperability with any DOCSIS compliant cable modem termination system (CMTS)
Supports IPv6 and IPv4 for the modem management interface
Supports Advanced Encryption Standard (AES)
Supports baseline privacy encryption (BPI+)
52