Siemens ET 200S Manual page 514

RESERVE
S Parameterize the interface module as follows:
Interface module
IM151-1 STANDARD
IM151-1 FO IM151-1 FO
STANDARD
IM151-1 BASIC
IM151-1 HIGH
FEATURE
S If you have parameterized an electronic module with inputs for the RESERVE
module, the following substitute values are reported:
– Digital input modules: 0
– Analog input modules: 7FFF
– Function module: 0
Note
If you use RESERVE modules:
S
The SF LED lights up on the interface module
S
A channel-specific diagnosis and module status "10
RESERVE module slot.
Terminal Assignment
The RESERVE module has no connection to the terminals of the TM-E terminal
module. This enables you to fully wire the TM-E terminal module and prepare it for
the subsequent application.
14-2
Parameters
Startup when expected <> actual
configuration
Module change during operation
Operation at Preset <> Actual
Configuration
H
Setting
Enable
Enable
Enable
: Wrong module" for the
B
Distributed I/O System ET 200S
EWA 4NEB 780 6024-02 07