Siemens ET 200S Manual page 124

Wiring and Fitting
Table 5-1 Removing and Inserting Electronic Modules
4 IQ-SENSE
1Count 24V/100kHz
1Count 5V/500kHz
1SSI
1STEP 5V/204kHz
2PULSE
1POS INC/Digital
1POS SSI/Digital
1POS INC/Analog
1POS SSI/Analog
1SI 3964/ASCII
1SI Modbus/USS
RESERVE
5-28
Modules Removing and
Inserting
Yes The sensors can also be
replaced during operation.
These are then
parameterized automatically
by the electronic module.
Yes The load voltage must be
switched off by means of an
external switch/fuse. external switch/fuse.
Yes –––
Yes –––
Yes –––
Distributed I/O System ET 200S
EWA 4NEB 780 6024-02 07
Conditions