Siemens ET 200S Manual page 524

Order Numbers
Connecting cable for 4 IQ-SENSE electronic module
The following table contains the connecting cables for the sensors on the 4
IQ-SENSE electronic module. You will also find these connecting cables in the NS
BERO catalog (in the chapter on 3RX1 plug connections).
Table A-10 Connecting Cable for 4 IQ-SENSE Electronic Module
Cable box (M12) for screw-type attachment with 5 m
PUR connecting cable 3 x 0.34 mm
Cable box (M12) for screw-type attachment with 5 m
PUR connecting cable 4 x 0.34 mm
STEP 7 and SIMATIC S7 Manuals
To program and commission the ET 200S with STEP 7, you require one of the
following manuals.
Table A-11 STEP 7 and SIMATIC S7 Manuals
S7-300 Programmable Controller
documentation package consisting of:
S
"CPU Specifications CPUs 312 IFM
to 318-2 DP" Reference Manual
S
"CPU Specifications CPUs 312 C to
314 C-2 PtP/DP" Reference Manual
S
"Technological Functions" manual
including CD with examples
S
S7-300 Programmable Controller
Hardware and Installation Manual
S
"Module Specifications" Reference
Manual
S
Instruction List "312 IFM to
318-2 DP" (can also be ordered
separately)
S
Instruction List "CPU 312 C to
314 C-2 PtP/DP" (can also be
ordered separately)
S
Getting Started
A-8
Designation
2
2
Designation
Order Number
3RX1533
3RX1536
Contents
Includes:
S
Operating instructions and a description of
the functions and technical specifications of
the CPUs
S
Description of the different process-related
functions
S
Description of the configuration, mounting,
wiring, networking and commissioning of an
S7-300
S
Functional descriptions and technical
specifications of the signal modules, power
supply modules and interface modules
S
List of the instruction set of CPUs and their
execution times List of executable blocks
and their execution times
S
Examples of different commissioning steps
leading up to a functional application
Distributed I/O System ET 200S
EWA 4NEB 780 6024-02 07