Siemens ET 200S Manual page 332

Digital Electronic Modules
11.14 4DO 24 VDC/2 A Standard Digital Electronic Module
(6ES7 132-4BD30-0AA0)
Order Number
6ES7 132-4BD30-0AA0
Features
S Digital electronic module with four outputs
S Output current 2 A per output
S Rated load voltage 24 VDC
S Suitable for solenoid valves, DC contactors, and indicator lights
Peculiarity
When you connect the 24 VDC rated load voltage to the power module by means
of a mechanical contact, depending on the circuit the digital outputs carry the "1"
signal for approximately 50 µs. You need to take this into account if you connect
the module to fast counters.
Terminal Assignment
The following table indicates the terminal assignment of the 4DO 24 VDC, 2 A
Standard for the different terminal modules:
Table 11-15 Terminal Assignment of the 4DO 24 VDC/2 A Standard
View
TM-E15S24-A1 and 4DO 24 VDC/2 A Standard
CH0
CH2
DO
0
1 5
DO
2
2 6
M
3 7
AUX1 (e.g. PE)
A A
4 8
11-56
Terminal Assignment
CH1
CH3
2 conductors
DO
1
DO
3
M
AUX1 (e.g. PE)
Remarks
Channel 0:
Terminals 1 and 3
Channel 1:
Terminals 5 and 7
Channel 2:
Terminals 2 and 3
Channel 3:
Terminals 6 and 7
DO: Output signal
(maximum 2 A per
channel)
M: Ground, load power
supply
Distributed I/O System ET 200S
EWA 4NEB 780 6024-02 07