Siemens ET 200S Manual page 226

Interface Modules
Technical Specifications
Dimensions and Weight
Dimensions
W H D (mm)
Weight
Data for Specific Modules
Transmission rate
Bus protocol
Interface
SYNC capability
FREEZE capability
Manufacturer ID
Direct communication
Clocking
Max. output current of
the PROFIBUS-DP
interface (5, 6)
Voltages, Currents, Potentials
Rated supply voltage of
the electronic
1)
components (1L+)
S
Reverse polarity
protection
S
Power failure
bypass
Isolation
S
Between the
backplane bus and
electronic
components
S
Between the
PROFIBUS-DP and
electronic
components
S
Between the supply
voltage and
electronic
components
Permitted potential
difference (to the rail)
Insulation tested with
8-12
45 x 119.5 x 75
Approx. 150 g
9.6; 19.2; 45.45; 93.75;
187.5; 500 kbps, 1.5 ; 3;
6; 12 Mbps
PROFIBUS-DP
RS 485
Yes
Yes
806A
H
Yes
No
80 mA
24 VDC
Yes
Min. 20 ms
No
Yes
No
75 VDC, 60 VAC
500 VDC
Current consumption
from rated supply
voltage (1L+)
Power dissipation of the
module
Status, Interrupts, Diagnostics
Interrupts
Diagnostic function
S
Group error
S
PROFIBUS-DP bus
monitoring
S
Monitoring of the
power supply
voltage of the
electronics
1)
Fusing the supply voltage:
– Fuse type: 24 V/2.5 A /type C
– Inrush current: 3.5 A
Distributed I/O System ET 200S
Approx. 200 mA
Typ. 3.3 W
None
Yes
Red "SF" LED
Red "BF" LED
Green "ON" LED
EWA 4NEB 780 6024-02 07