Siemens ET 200S Manual page 93

4.7 Applying Slot Number Labels and Color Identification Labels
Features
S The slot number labels identify the individual I/O modules with a slot (1 to 63).
S The color identification labels permit individual color coding of the terminals in
accordance with company or national conventions. The color identification
labels are available in white, red, blue, brown, yellow, yellow-green, and
turquoise. Each terminal on the terminal module can have a color identification
label.
Requirements
S The terminal modules must be installed.
S There must be no electronic modules connected when you apply the slot
number labels.
S The terminal modules should not be wired when you apply the color
identification labels.
S The slot number labels and color identification labels are applied onto the
terminal modules.
– Position of the slot number label: under the coding element on the terminal
module.
– Position of the color identification labels: right next to each terminal on the
terminal box.
Tool Required
3-mm screwdriver (for removal only)
Distributed I/O System ET 200S
EWA 4NEB 780 6024-02 07
Installation
4-13