Siemens ET 200S Manual page 486

Analog Electronic Modules
Analog Value Generation
Resolution (including sign)
Conversion time (per
channel)
Settling time
S
For resistive load
S
For capacitive load
S
For inductive load
Suppression of Interference, Limits of Error
Crosstalk between the
outputs
Operational limit
(in the entire temperature
range, with reference to the
output range)
Basic error limit (operational
limit at 25 _C with reference
to output range)
Temperature error (with
reference to the output
range)
Linearity error (with
reference to the output
range)
Repeatability (in steady
state at 25 _C with
reference to output range)
Output ripple (with
reference to output range,
bandwidth 0 to 50 kHz)
12-130

10 V/16 bits Output range (rated value)
1 to 5 V/14 bits
Max. 1.0 ms Load impedance (in the
rated range of the output)
S
0.1 ms Voltage output
S
0.5 ms
S
0.5 ms
Destruction limit against
voltages/currents applied
> 60 dB
from outside
S
"0.05%
S
"0.01%
Connection of actuators
S
"0.001%/K
"0.02%
"0.01%
"0.02%
Data for Selecting an Actuator
"10 V
1 to 5 V
Min. 1.0 kW
For capacitive load Max. 1µF
Short-circuit protection Yes
Short-circuit current Approx. 25 mA
Voltage at the outputs to Max. 15 V
M continuous; 75 V for
ANA
max. 1 s (pulse duty
factor 1:20)
Current Max. DC 50 mA
Voltage output
Two-conductor Possible, without
connection compensation of the
line resistances
Four-conductor Possible
connection
Distributed I/O System ET 200S
EWA 4NEB 780 6024-02 07