Fujitsu PRIMEQUEST 2000 Series Manual page 92
Configuring the san boot environment
Hide thumbs
Also See for PRIMEQUEST 2000 Series:
- Tool reference (734 pages) ,
- Administration manual (467 pages) ,
- Message reference (232 pages)
Table of Contents
Advertisement
Settings on the Fibre Channel Card (16Gbps FC Card)
3.2.4 Boot device setting
The device that boot from SAN setting. Please do not set two or more devices.
1.
Select connect boot device from the FC port, and then press the [Enter] key.
2.
Select [Configure Boot Devices] form the Main menu, and then press the [Enter] key.
C122-E206-04EN
FIGURE 3.50 Boot device setting (1)
FIGURE 3.51 Boot device setting (2)
92
Advertisement
Table of Contents
