Fujitsu PRIMEQUEST 2000 Series Manual page 40
Configuring the san boot environment
Hide thumbs
Also See for PRIMEQUEST 2000 Series:
- Tool reference (734 pages) ,
- Administration manual (467 pages) ,
- Message reference (232 pages)
Table of Contents
Advertisement
Settings on the Fibre Channel Card (8Gbps FC Card)
2.2
Procedure for Setting Legacy BIOS Driver Version 3.20a5 or
Later on the 8Gbps FC Card
This section describes the procedure for setting Legacy BIOS driver version 3.20a5 or later.
2.2.1 Setting the Legacy BIOS Driver Boot
1.
Select [Device Manager], and then press the [Enter] key.
FIGURE 2.44 Device Manager menu
2.
Select [PCI Subsystem Configuration], and then press the [Enter] key.
FIGURE 2.45 Device Manager
C122-E206-04EN
40
Advertisement
Table of Contents
