Fujitsu PRIMEQUEST 2000 Series Manual page 49
Configuring the san boot environment
Hide thumbs
Also See for PRIMEQUEST 2000 Series:
- Tool reference (734 pages) ,
- Administration manual (467 pages) ,
- Message reference (232 pages)
Table of Contents
Advertisement
Settings on the Fibre Channel Card (8Gbps FC Card)
FIGURE 2.61 Fabric Point to Point Setting screen
■Link Speed setting
Note
Make the following setting that corresponds to the connection kink speed (2 Gbps/ 4 Gbps/ 8 Gbps).
Do not set [Auto select (Default)].
1.
Select [Configure Advance Adapter Parameters] from the Main menu and press the [Enter] key.
FIGURE 2.62 Configure Advanced Adapter Parameters Setting Screen
C122-E206-04EN
49
Advertisement
Table of Contents
