Fujitsu PRIMEQUEST 2000 Series Manual page 5

Configuring the SAN Boot Environment
1.3.3 Notes on system after installation
When the system is installed on UEFI BIOS, to set the by-path boot in the boot option is recommended after the OS
installation.
 Procedure for the boot option setting by using SAN boot by-path.
Start the Partition.
1.
During FUJITSU logo appears, press any key (except the [Enter] key) to display the Boot Manager front page.
Select [Boot Maintenance Manager].
2.
Select [Boot Option] in the [Boot Maintenance Manager] screen.
3.
C122-E206-04EN
5