Fujitsu PRIMEQUEST 2000 Series Manual page 77

Settings on the Fibre Channel Card (16Gbps FC Card)
8. Select [Go to Configuration Main Menu], and then press the [Enter] key to return to the higher menu.
9. To register the dump device of sadump, procedure 3 is repeated. Please advance to step 10 when you do not register
the dump device.
10. Select [Delete Boot Device] from the [Emulex Adapter Configuration Main Menu] screen, and then press the [Enter]
key. (Here, confirm only the registration status of the boot device that was set with [Commit Changes].)
C122-E206-04EN
FIGURE 3.27 Boot device setting (8)
FIGURE 3.28 Boot device setting (9)
77