Fujitsu PRIMEQUEST 2000 Series Manual page 64
Configuring the san boot environment
Hide thumbs
Also See for PRIMEQUEST 2000 Series:
- Tool reference (734 pages) ,
- Administration manual (467 pages) ,
- Message reference (232 pages)
Table of Contents
Advertisement
Settings on the Fibre Channel Card (16Gbps FC Card)
FIGURE 3.6 MMB Web-UI display
3.1.5 Initializing the HBA Setting
Restore the HBA setting to the default state.
Remarks
An HBA that has just been shipped from the factory has initialized settings and does not require the work below.
Perform this work to initialize them again.
1. Select [Set Emulex Adapter to Default Settings], and then press the [Enter] key.
FIGURE 3.7 Menu for HBA setup
64
C122-E206-04EN
Advertisement
Table of Contents
