Fujitsu PRIMEQUEST 2000 Series Manual page 25
Configuring the san boot environment
Hide thumbs
Also See for PRIMEQUEST 2000 Series:
- Tool reference (734 pages) ,
- Administration manual (467 pages) ,
- Message reference (232 pages)
Table of Contents
Advertisement
Settings on the Fibre Channel Card (8Gbps FC Card)
1. Select [Force Link Speed <Auto negotiate – Default>], and then press the [Enter] key.
FIGURE 2.20 Static Link Speed setting (1)
2. Select the link speed corresponding to the connection environment (connected FC switch or SAN storage
unit), and then press the [Enter] key.
FIGURE 2.21 Static Link Speed setting (2)
C122-E206-04EN
25
Advertisement
Table of Contents
