Fujitsu PRIMEQUEST 2000 Series Manual page 74

Settings on the Fibre Channel Card (16Gbps FC Card)
Remarks
If the expected Fibre Device is not displayed, there is a possibility that the setting of the SAN storage or the setting or
physical connection of the FC switch is incorrect.
Confirm these settings once again.
3. The [Port 001:Emulex LPe16002B-M6-F 16Gb 2-port PCIe Fibre Chann] screen appears. Select [Add Boot Device],
and then press the [Enter] key.
4. The [SAN Discovery Target List] screen displays the targets found in the search by [Scan for Fibre Devices].
Select the Fibre Device specifying the boot device, and then press the [Enter] key.
C122-E206-04EN
FIGURE 3.22 Boot device setting (3)
FIGURE 3.23 Boot device setting (4)
74