Fujitsu PRIMEQUEST 2000 Series Manual page 113

Configuring the san boot environment
Hide thumbs Also See for PRIMEQUEST 2000 Series:
Table of Contents

Advertisement

Installing VMware attention
CHAPTER 6
Refer to OS installation manual for the installation of VMware OS.
Regarding to how to install ESX, Carry out the procedure with install guide after getting install media
Required software
For details on the operating systems that support the SAN boot, the FC card/driver/firmware, and the FC card/firmware
version, visit the following website. Also, the latest driver and firmware can be obtained from the following website. For a
multipath configuration, the ETERNUS multipath driver is required.
-
Driver/firmware website
http://support.ts.fujitsu.com/Download/
**Acquire the drivers and utilities for the FC card from the above website. For a multipath configuration, the ETERNUS
multipath driver is required
C122-E206-04EN
Installing VMware attention
113

Advertisement

Table of Contents
loading

Table of Contents