Fujitsu PRIMEQUEST 2000 Series Manual page 51

Settings on the Fibre Channel Card (8Gbps FC Card)
4. Press the [ESC] key three times to return LightPlus BIOS Utility.
FIGURE 2.65 Emulex Lightplus BIOS Utility screen
5. Press the [ESC] key again. Press [Y] to reboot the system and save changes.
FIGURE 2.66 Saving Emulex Lightplus BIOS Setting
Changing the setting of the opposing device
The setting of the opposing Fibre Channel switch and SAN storage unit disk array must also be made static so that it
corresponds to the static setting of the 8Gbps FC Card.
For details on the settings required on the ETERNUS when connecting to it, see the ETERNUS manuals at the following
website:
http://www.fujitsu.com/global/support/products/computing/storage/disk/manuals/
C122-E206-04EN
51