Fujitsu PRIMEQUEST 2000 Series Manual page 70
Configuring the san boot environment
Hide thumbs
Also See for PRIMEQUEST 2000 Series:
- Tool reference (734 pages) ,
- Administration manual (467 pages) ,
- Message reference (232 pages)
Table of Contents
Advertisement
Settings on the Fibre Channel Card (16Gbps FC Card)
Static Link Speed setting
With EFI-Bios, make the following setting that corresponds to the connection link speed (4 Gbps/8 Gbps/16 Gbps).
Note
Do not set [Auto negotiate - Default]. First, make the fixed setting for Link Speed. Otherwise, the connected device will not
be normally recognized
1. Select [Force Link Speed <Auto negotiate - Default>], and then press the [Enter] key.
2. Select the link speed corresponding to the connection environment (connected FC switch or SAN storage unit), and
then press the [Enter] key.
C122-E206-04EN
FIGURE 3.15 Static Link Speed setting (1)
FIGURE 3.16 Static Link Speed setting (2)
70
Advertisement
Table of Contents
