Fujitsu PRIMEQUEST 2000 Series Manual page 91

Settings on the Fibre Channel Card (16Gbps FC Card)
4. Press the [ESC] key three times to return LightPlus BIOS Utility.
5. Press the [ESC] key again. Press [Y] to reboot the system and save changes.
Changing the setting of the opposing device
The setting of the opposing Fibre Channel switch and SAN storage unit disk array must also be made static so that it
corresponds to the static setting of the 16Gbps FC Card.
For details on the settings required on the ETERNUS when connecting to it, see the ETERNUS manuals at the following
website:
http://www.fujitsu.com/global/support/products/computing/storage/disk/manuals/
C122-E206-04EN
FIGURE 3.48 Emulex LightPluse BIOS Utility Screen
FIGURE 3.49 Saving Emulex LightPluse BIOS Settings
91