Settings on the Fibre Channel Card (16Gbps FC Card)
3.1.9 Applying settings
Restart the system to apply the changes in the settings.
To restart the system, use the following procedure, or select [Reset] from the [Power Control] window of the MMB Web-UI.
1. Press the [Esc] key to go to the Boot Manager Front Page.
2. Select [Boot Maintenance Manager], and then press the [Enter] key to go to the [Boot Maintenance Manager] screen.
C122-E206-04EN
FIGURE 3.33 Restarting the system (1)
FIGURE 3.34 Restarting the system (2)
81