Fujitsu PRIMEQUEST 2000 Series Manual page 101

Consideration of Windows Installation
4.2 Changing and Checking the Setting of Detailed FC Card
Information
To increase the stability of connectivity with the ETERNUS series machine, adjust some of the driver parameters after installing
the operating system and driver.
4.2.1 Setting driver parameters (for OCManager)
1. Click the [Start] button to select [Programs] or [All programs], and then select [Emulex] - [OCManager].
OCManager starts.
The local server and the HBAs under its control are displayed in the left side of the window. Select the local server and then
click the [Driver Parameters] tab in the right side of the window.
Note
Driver parameters can be set not for the local server but for each HBA. If driver parameters are set for each HBA, the HBA may
be changed due to replacement for maintenance purposes or server switching. In such a case, the driver parameters are set to
the default setting values. As a rule, select the local server and then set the driver parameters.
2. Set the following driver parameters.

Topology

Queue Depth

Queue Target

Link Speed
For details on the settings required on the ETERNUS when connecting to it, see the ETERNUS manuals at the following website:
http://www.fujitsu.com/global/support/products/computing/storage/disk/manuals/
3. Confirm the settings made so far.
After finishing all the settings, from the [File] menu, select [Exit] to quit OCManager.
Then, proceed to 4.3 Checking Registry Information.
4.3 Note concerning connection with storage device
The setting change of the FC card might be necessary according to the connected storage.
Please refer to the manual of the storage device for details.
For details on the settings required on the ETERNUS when connecting to it, see the ETERNUS manuals at the following website:
http://www.fujitsu.com/global/support/products/computing/storage/disk/manuals/
C122-E206-04EN
101