Fujitsu PRIMEQUEST 2000 Series Manual page 31
Configuring the san boot environment
Hide thumbs
Also See for PRIMEQUEST 2000 Series:
- Tool reference (734 pages) ,
- Administration manual (467 pages) ,
- Message reference (232 pages)
Table of Contents
Advertisement
Settings on the Fibre Channel Card (8Gbps FC Card)
8. The LUN connected to the selected target is displayed. Select the LUN from which the system is to be started. Then,
press the [Enter] key. A confirmation screen appears.
FIGURE 2.31 Boot device setting (7)
9. Select [Commit Changes], and then press the [Enter] key.
FIGURE 2.32 Boot device setting (8)
C122-E206-04EN
31
Advertisement
Table of Contents
