Fujitsu PRIMEQUEST 2000 Series Manual page 87
Configuring the san boot environment
Hide thumbs
Also See for PRIMEQUEST 2000 Series:
- Tool reference (734 pages) ,
- Administration manual (467 pages) ,
- Message reference (232 pages)
Table of Contents
Advertisement
Settings on the Fibre Channel Card (16Gbps FC Card)
3.2.2
Enabling BIOS
Enable the HBA BIOS so that the HBA can recognize the LUNs of the SAN storage unit and to enable the system to be
started from one of them.
Select [Enable/Disable Boot from SAN], and then press the [Enter] key.
1.
FIGURE 3.40 Enable/Disable Boot form SAN Setup Screen (1)
Set [Boot BIOS] is "Enabled," and then press the [Enter] key.
2.
FIGURE 3.41 Enable/Disable Boot form SAN Setup Screen (2)
Note
Confirm that [Boot BIOS] is "Enabled."
C122-E206-04EN
87
Advertisement
Table of Contents
