Fujitsu PRIMEQUEST 2000 Series Manual page 62
Configuring the san boot environment
Hide thumbs
Also See for PRIMEQUEST 2000 Series:
- Tool reference (734 pages) ,
- Administration manual (467 pages) ,
- Message reference (232 pages)
Table of Contents
Advertisement
Settings on the Fibre Channel Card (16Gbps FC Card)
3.1.3 Starting the HBA Setup Utility and Selecting an HBA
1. HBA list to be set is displayed on [Device Manager] screen.
2. Select [Port 001:Emulex LPe16002B-M6-F 16Gb 2-port PCIe Fibre Chann..] screen, and then press the [Enter] key
(Above is the example where port 0 of LPE16002B-M6-F Dual port FC Card) is selected.)
FIGURE 3.4 Device Manager screen (HBA list)
62
C122-E206-04EN
Advertisement
Table of Contents
